When checking keys for matching mappings, previously we did two checks:
1. Keysyms translated by xkb.
2. Raw keysyms
This commit removes the first check, so only the second is checked.
We're doing this because of strange behavior that xkb shows for some
layouts and keys. When pressing `Shift Space` on some layouts (Swedish
among others), xkb reports `Shift` as consumed. This leads to the case
that we cannot distinguish between `Space` and `Shift Space` presses
when doing a correct translation with xkb.
e.g. `riverctl map -layout 0 normal Super Y spawn foot`
When this mapping is checked against a pressed key, layout 0 will be used to translate the pressed key instead of the currently active layout.
The number denotes to an index of the layouts set with
`XKB_DEFAULT_LAYOUT`.
Currently when the surface under the hidden cursor changes, we
passthrough() which results in the cursor being made visible and giving
pointer focus to the surface under the cursor if any. Obviously this is
not desirable as the cursor is supposed to remain hidden until moved.
This added check prevents this.
From the riverctl.1 man page:
*hide-cursor* *timeout* _timeout_
Hide the cursor if it wasn't moved in the last _timeout_
milliseconds until it is moved again.
The default value is 0, which disables automatically hiding the
cursor. Show the cursor again on any movement.
*hide-cursor* *when-typing* *enabled*|*disabled*
Hide the cursor when pressing any non-modifier key. Show the cursor
again on any movement.
The motivation for this change is to simplify the implementation
and remove a massive footgun that is currently present and causing
UB/crashes. If a layer surface is destroyed in arrangeLayers() then
the code in LayerSurface.handleCommit() after the arrangeLayers()
call accesses free'd memory. This is of course possible to fix,
but it's far simpler to loosen up the protocol implementation a bit.
The new implementation is also in line with what sway and the new
wlroots layer shell helper do and is perfectly valid according to
the protocol.
I have encountered a crash (failing assert) if a view specified a fixed
size less than this minimum, and according to ifreund this behavior was
planned to be removed, anyway.
In particular, this fixes a crash that can happen if a client is made
non-fullscreen and then, while that transaction is ongoing, made
fullscreen again.
Notably, we no longer call both wlr_output_test and wlr_output_commit
when applying an output config, which seems to fix or workaround an
occasional crash since updating to wlroots 0.15.0.
Currently river will place the surface at the top or left edge if
opposing anchors are set without a 0 width/height. Instead, center
the surface between the anchors.
We currently don't properly handle xdg surface geometry of the parent,
which causes popups to render partially off-screen in some cases.
GTK4 clients such as easyeffects seem to trigger this issue reliably.
I thought this should be fine as river won't yield to the event loop
when Seat.deinit() is called before the wlroots seat is destroyed, but
a segfault on exit has been reported with a stack trace mentioning
wlr_seat_destroy(). Let's hope this clears that up.
The new code to dedup XcursorManager.setCursorImage() calls for
efficiency currently doesn't handle clients setting the cursor properly.
This commit corrects this oversight.
This patch allows to focus outputs by clicking on the empty background and by
clicking on layer surfaces without keyboard interactivity. This makes it
possible to use the cursor to focus outputs with no visible views.
This also fixes problems with pointer interactive layer surfaces (for example
launchers and docks) on non-focused outputs.
Currently wlroots sends use the drag destroy event before sending the
wl_data_device.leave event to the client, which makes things a bit
awkward. My patch fixing this has been merged to wlroots master so we
can remove this when upgrading to wlroots 0.15, but until then this
workaround will fix the issue.
This doesn't really matter that much as unrecognized options will still
trigger a help message to be printed, but -h is much more standard so
lets make the predictable choice here while sticking to only single '-'
flags.
mpv for example has key bindings to set the window size to a multiple of
the video resolution. This is a valid use case for client-size resizing
of the view and river should respect this if the view is floating.
This greatly improves the UX of this feature, as views moving under a
stationary cursor (as happens during the zoom command for example) will
no longer trigger focus change.
Currently the implementation treats the x/y coordinates of
View.State.box as layout coordinates instead of output-relative. This
causes issues when using an output not at 0,0.
Layout generators are generally pretty fast. The timeout is only reached when
the generator is faulty / stuck. In that case, freezing for 1 second is simply
bad UX.
Currently the view destruction sequence is started as soon as a view
is unmapped. However, this is incorrect as a client may map the view
again instead of destroying it.
Instead, only start the view destruction sequence when the underlying
xdg toplevel or xwayland surface is destroyed.
Currently if destroy() is called while a subsurface is mapped a dangling
commit listener is left behind. This is obivously a problem, so check if
the subsurface is mapped in destroy() and remove the listener if needed.
Currently if another configure is in flight after the one we are
tracking the serial of and the client acks the second configure as well
(or only the second configure) before committing, we will never realize
the configure we are tracking has been acked.
Instead, listen for the ack_configure signal and set a bool that we can
check on surface commit.
This probably isn't an issue that would actually be hit by well behaved
clients as river doesn't send redundant configure events. However,
having correct code is always better even if it's slightly more complex.
This extends the `csd-filter-add` command to allow matching on window
titles as well, using a `csd-filter-add kind pattern` syntax. The
following kinds are supported:
* `title`, which matches window titles
* `app-id`, which matches app ids
Only exact matches are considered.
As an example following configuration applies client-side decorations to
all windows with the title 'asdf with spaces'.
riverctl csd-filter-add title 'asdf with spaces'
It turns out that wlroots requires us to do a bit more than just create
the wlr_viewporter. Docs are being added to the wlroots header in
https://github.com/swaywm/wlroots/pull/3171
This extends the `float-filter-add` command to allow matching on window
titles as well, using a `float-filter-add kind pattern` syntax. The
following kinds are supported:
* `title`, which matches window titles
* `app-id`, which matches app ids
Only exact matches are considered.
As an example following configuration floats all windows with the title
'asdf with spaces'.
riverctl float-filter-add title 'asdf with spaces'
Repeating mappings are created using the -repeat option to the map
command:
% riverctl map normal $mod+Mod1 K -repeat move up 10
- repeating is only supported for key press (not -release) mappings
- unlike -release, -repeat does not create distinct mappings: mapping a
key with -repeat will replace an existing bare mapping and vice-versa
Resolves#306
Currently if a view is mapped while some other view is fullscreen, it
will not be added to the focus stack, which means that if the fullscreen
view is then closed the view which was not added to the focus stack will
not be focused.
To fix this, always add views to the focus stack on map.
The view.unmap() call may synchronously destroy the view, which makes
the the code removing listeners which is currently run after
view.unmap() access free'd memory.
To fix this, simply change the order of the calls to match that of
XdgToplevel.handleUnmap().
Menus, tooltips, etc. can extend beyond a view's borders. Render views
after their borders so floating content appears on top.
Unfocused floating content can still be obscured by views higher in the
stack and the focused view.
If using the on-output-change cursor warp option river currently crashes
when the last real output is disabled as the noop output used as a
fallback is not present in the output layout.
This is pretty much unusable after recent improvements to the cursor
code, and was totally broken causing a stack overflow as soon as the
cursor was moved over any surface until the previous commit.
Furthermore, none of the core contributors or people active on IRC seem
to use it.
Currently we hit a stack overflow as we do not check if the target view
already has keyboard focus before calling Seat.focus() in
Cursor.passthrough(). To fix this, simply add this check.
When an xdg toplevel, layer surface, etc is destroyed, it is not
guaranteed that all the children in the surface tree have already been
destroyed. If there are still children around, destroying the root of
the tree would leave dangling pointers.
To fix this, destroy all children when destroying any node in the tree.
The current format of #RRGGBBAA is problematic as # starts a comment
in POSIX compliant shells, requiring escaping/quoting and increasing
complexity.
This is a breaking change.
This arrange is actually required because the post_fullscreen box might
not hold the correct dimensions if the view was made fullscreen while
a transaction was already in progress.
Currently if a view is moved from layout to fullscreen while a
transaction involving that view is in progress the saved buffers are not
dropped, which causes stale state to be rendered.
This is guaranteed to already be set to the layout being committed. It
is set either when a client binds a new layout object or when the user
changes the layout namespace in use.
This is currently unused and I don't like the approach anymore
regardless. If/when we need positional arguments (probably when
implementing the upcoming river-control protocol in rivertile)
they should be handled separately from flags.
This commit also improves the CLI error reporting to always print the
usage string if invalid arguments were passed.
The previous commit re-introduced a bug fixed by a3c65713 which caused
the pointer enter event not to be sent until moving the pointer when
switching tag focus or otherwise manipulating the window manager caused
the cursor to end up over a new surface.
