55 lines
1.5 KiB
Plaintext
55 lines
1.5 KiB
Plaintext
dnl The following line enables macro expansion in # comments
|
|
changecom(`//')
|
|
# These options do not have default value and MUST be set before running
|
|
|
|
# LCD pins (the ones below match up with the diagram in README.md)
|
|
# Register select
|
|
rs_pin = 4
|
|
# Read-write
|
|
rw_pin = 17
|
|
# Enable
|
|
en_pin = 27
|
|
# Optional backlight pin, set to -1 to disable
|
|
bl_pin = 26
|
|
# d0-d7
|
|
data_pins = 22 10 9 11 5 6 13 19
|
|
|
|
# Button pins
|
|
sel_pin = 14
|
|
back_pin = 15
|
|
up_pin = 18
|
|
down_pin = 23
|
|
|
|
# Options below this comment have compile-time defaults (which are show below)
|
|
|
|
# GPIO device file
|
|
#gpio_file = DEFAULT_GPIO_DEVICE
|
|
|
|
# sysctl(8) keys for the temperature sensor
|
|
#temp_key = DEFAULT_TEMP_KEY
|
|
#humid_key = DEFAULT_HUMID_KEY
|
|
# Set to empty to disable
|
|
#fail_key = DEFAULT_FAIL_KEY
|
|
|
|
# Number of temperature sensor fails before exit
|
|
#fail_limit = DEFAULT_FAIL_LIMIT
|
|
|
|
# Database location
|
|
#database_location = DEFAULT_DATABASE_LOCATION
|
|
|
|
# Time between data points, note that this is probably limited by the kernel's
|
|
# gpioths driver (5 seconds)
|
|
#refresh_time = DEFAULT_REFRESH_TIME
|
|
|
|
# Temperature unit F for Fahrenheit, C for Celsius
|
|
#temp_unit = DEFAULT_TEMP_UNIT
|
|
|
|
# The base name for export, .sqlite3 will be appended for SQLite exports and
|
|
# .csv will be appended for CSV exports
|
|
#export_file_name = DEFAULT_EXPORT_FILE_NAME
|
|
|
|
# The timezone used. This is overridden by the environment variable TZ. See the
|
|
# tzset(3) manual page for more information about the format of this. Leave
|
|
# blank for system default
|
|
#timezone = DEFAULT_TIMEZONE
|