river/doc/riverctl.1.scd

RIVERCTL(1) "github.com/ifreund/river" "General Commands Manual"
# NAME

riverctl - command-line interface for controlling river

# SYNOPSIS

*riverctl* _command_ [_command specific arguments_]

# DESCRIPTION

*riverctl* is a command-line interface inspired by bspc from bspwm
used to control and configure river.

# COMMANDS

## ACTIONS

*close*
	Close the focused view.

*csd-filter-add* _app-id_
	Add an app-id to the CSD filter list. Windows with this app-id are allowed
	to use client side decoration instead of the default server side decoration.

*exit*
	Exit the compositor, terminating the Wayland session.

*float-filter-add* _app-id_
	Add an app-id to the float filter list. Windows with this app-id will start
	floating.

*focus-output* *next*|*previous*
	Focus next or previous output.

*focus-view* *next*|*previous*
	Focus next or previous view in the stack.

*layout* *full*|_command_
	Provide a command which river will use for generating the layout of
	non-floating windows on the currently focused output. See
	*river-layouts*(7) for details on the expected formatting of the output
	of layout commands. Alternatively, “full” can be given instead of a
	command to cause river to use its single internal layout, in which
	windows span the entire width and height of the output.

*mod-master-count* _integer_
	Increase or decrease the number of master views. _integer_ can be
	positive or negative.

*mod-master-factor* _float_
	Make the master area bigger or smaller. _float_ is a positive or
	negative floating point number (such as 0.05) where 1 corresponds to
	the whole screen.

*move* *up*|*down*|*left*|*right* _delta_
	Move the focused view in the specified direction by _delta_. The view will
	be set to floating.

*resize* *horizontal*|*vertical* _delta_
	Resize the view in the given orientation by _delta_. The view will be set to
	floating.

*snap* *up*|*down*|*left*|*right*
	Snap the view to the specified screen edge. The view will be set to floating.

*send-to-output* *next*|*previous*
	Send the focused view to the next or the previous output.

*spawn* _shell_command_
	Run _shell_command_ using _/bin/sh -c_. Put single quotes around
	_shell_command_ if you do not want special characters to get
	interpreted by your shell before the command gets passed to _/bin/sh_.

*swap* *next*|*previous*
	Swap the focused window with the next/previous visible non-floating window.
	When the focused view is the first view there is no previous view.
	In this case *previous* swaps with the last view.
	*next* behaves analogous.

*toggle-float*
	If the focused view is floating, make it tiled. If it is tiled, make
	it floating.

*toggle-fullscreen*
	Toggle the fullscreen state of the focused view.

*zoom*
	Bump the focused view to the top of the layout stack to make it the
	new master.

## ACTIONS ON TAGS

Tags are like workspaces but more flexible: You can assign views to
multiple tags and look at multiple tags at once. A _tagmask_ is used
to represent which tags are visible. The following commands take a
_tagmask_ in base 10 as argument but _tagmasks_ are best understood in
binary: 000000001 means that the first tag is visible; 111111111 means
that tag 1 through 9 are visible.

*set-focused-tags* _tagmask_
	Show the tags specified with _tagmask_.

*set-view-tags* _tagmask_
	Assign focused view to tags specified with _tagmask_.

*toggle-focused-tags* _tagmask_
	Toggle visibility of tags specified with _tagmask_.

*toggle-view-tags* _tagmask_
	Toggle tags of focused view as specified with _tagmask_.

## CONFIGURATION COMMANDS

*attach-mode* *top*|*bottom*
	Configure where new views should attach in the view stack for the currently focused output.

*background-color* _#RRGGBB_|_#RRGGBBAA_
	Set the background color.

*border-color-focused* _#RRGGBB_|_#RRGGBBAA_
	Set the border color of focused views.

*border-color-unfocused* _#RRGGBB_|_#RRGGBBAA_
	Set the border color of unfocused views.

*border-width* _pixels_
	Set the border width to _pixels_.

*declare-mode* _name_
	Create a new mode called _name_ for use in mappings.

*enter-mode* _name_
	Switch to given mode if it exits.

*focus-follows-cursor* *disabled*|*normal*|*strict*
	When _disabled_ moving the cursor will not influence the focus. This is the default setting.
	If set to _normal_ moving the cursor over a window will focus that window.
	The focus still can be changed and moving the cursor within the (now unfocused) window will
	not change the focus to that window but let the currently focused window in focus.
	When set to _strict_ this is not the case. The focus will be updated on every cursor movement.

	When the to be focused view is on another output than the currently focused output the view's
	output is focused.

*map* [-release] _mode_ _modifiers_ _key_ _command_
	_mode_ is either "normal" (the default mode), "locked" (the mode entered when
	an input inhibitor such as a lock screen is active) or a mode created with *declare-mode*.
	If _-release_ is specified the mapping is executed on key release rather than key press.
	_modifiers_ is a list of one or more of the following
	modifiers separated with a plus sign:

	- Shift
	- Lock (Caps lock)
	- Control (Ctrl)
	- Mod1 (Alt)
	- Mod2
	- Mod3
	- Mod4 (Super, Logo, Windows)
	- Mod5

	_key_ is an XKB key name. See _/usr/include/xkbcommon/xkbcommon-keysyms.h_
	for a list of special key names. _command_ can be any of the above commands.

	A mapping without modifiers can be created by using "None" as sole modifier.

*map-pointer* _mode_ _modifiers_ _button_ _action_
	_mode_ and _modifiers_ are the same as for *map*.

	_button_ is the name of a linux input event code. The most commonly used
	values are:

	- BTN_LEFT - left mouse button
	- BTN_RIGHT - right mouse button
	- BTN_MIDDLE - middle mouse button

	A complete list may be found in _/usr/include/linux/input-event-codes.h_

	_action_ is one of the following values:

	- move-view
	- resize-view

*opacity* _focused-opacity_ _unfocused-opacity_ _starting-opacity_ _opacity-step_ _opacity-delta-t_
	Set the server side opacity of views.

	_focused-opacity_ sets the opacity of the focused window, _unfocused-opacity_
	the opacity of every unfocused window while _starting-opacity_ sets the
	opacity a window will have at startup before immediately transitioning to
	either the focused or unfocused opacity. These settings require a floating
	point number from 0.0 (fully transparent) to 1.0 (fully opaque).

	Opacity transitions can be animated. _opacity-step_ sets the amount the
	opacity should be increased or decreased per step of the transition. It
	requires a floating point number from 0.05 to 1.0. If set to 1.0, animations
	are disabled. _opacity-delta-t_ sets the time between the transition steps
	in milliseconds.

*outer-padding* _pixels_
	Set the padding around the edge of the screen to _pixels_.

*set-repeat* _rate_ _delay_
	Set the keyboard repeat rate to _rate_ key repeats per second and
	repeat delay to _delay_ milliseconds.

*unmap* [-release] _mode_ _modifiers_ _key_
	Removes the mapping defined by the arguments *-release*, *modifiers* and *key* from *mode*.
	See *map* for an explanation of the arguments.

*unmap-pointer* _mode_ _modifiers_ _button_
	Removes the mapping defined by the arguments *modifiers* and *button* from *mode*.
	See *map-pointer* for an explanation of the arguments.

*view-padding* _pixels_
	Set the padding around the edge of each view to _pixels_.

*xcursor-theme* _theme_name_ [_size_]
	Set the xcursor theme to _theme_name_ and optionally set the
	_size_. The theme of the default seat determines the default
	for XWayland and made available through the _XCURSOR_THEME_ and
	_XCURSOR_SIZE_ environment variables.

# EXAMPLES

Bind bemenu-run to Super+P:

	riverctl map normal Mod4 P spawn bemenu-run

See _contrib/config.sh_ for some basic keybindings.

# AUTHORS

Maintained by Isaac Freund <ifreund@ifreund.xyz> who is assisted by open
source contributors. For more information about river's development, see
<https://github.com/ifreund/river>.

# SEE ALSO

*river*(1), *river-layouts*(7), *rivertile*(1)